Specifications for MULTI-COLOR-PAM - Accessories

Suspension Configuration

Temperature Control Block for Cuvette ED-101US/T

Sectioned block with central 10 x 10 mm opening to be mounted on top of the ED-101US/MD unit; to be connected to external flow-through water bath (not included), weight: 250 g

Temperature Control Unit US-T

Consisting of Power-and-Control Unit US-T/DR with separate AC power supply and Peltier-Heat-Transfer Head US-T/DS. Cooling down to 12 K below ambient temperature, heating up to 15 K above ambient temperature. To be mounted on top of Walz ED-101US-type optical unit accommodating a 10 x 10 mm cuvette

Spherical Micro Quantum Sensor US-SQS/WB

3.7 mm diffusing sphere coupled to integrated PAR-sensor via 2 mm fiber, compact amplifier unit and special holder for mounting on Optical Unit ED-101US/MD; to be connected to Power-and-Control-Unit MCP-C

Miniature Magnetic Stirrer PHYTO-MS

Type Variomag Mini, with adapter for bottom port of Optical Unit ED-101US/MD and connector to plug into Power-and-Control-Unit MCP-C. Control via MCP-C and PamWin software

Leaf Configuration

Optical Unit for Leaf Measurements MCP-BK

Featuring optical ports for mounting Measuring Heads MCP-E and MCP-D; including leaf clip holder, with opening for fixing Mini Quantum Sensor US-MQS/WB in the leaf plane. To be mounted on stand

Mini Quantum Sensor US-MQS/WB

Consisting of cosine-corrected PAR-sensor (housing: diameter 14 mm, height 16 mm; diffuser diameter 5.5 mm) with compact amplifier unit. To be connected to the Power-and-Control-Unit MCP-C. For measuring incident PAR, when using the Optical Unit for Leaf Measurements MCP-BK

90 Degree Measuring Head Holder DUAL-H90

Consisting of a right angle bracket made of black anodized aluminum (10.0 cm x 4.0 cm x 5.5 cm, W x D x H. Weight 175 g), with metal rod for attachment to a laboratory stand, each bracket arm with special adapter made of Polyoxymethylene (POM) to position a measuring head. Including a laboratory scissor jack (14.0 cm x 12.0 cm x 6.0 cm, W x D x H. Weigth 1370 g) and non-fluorescent rubber foam mat

Multi-Color Emitter Head with UV-A Measuring Light MCP-E/UVA

All specifications identical to Multi-Color Emitter Head MCP-E except the 400 nm pulse-modulated measuring light replaced by 365 nm pulse-modulated measuring light on Chip-on-board multi-wavelength measuring light LED emitter.