Accessories for MAXI Version IMAGING-PAM
IMAG-MAX/F
The pre-filter consists of a carrier plate with 44 individual blue-green filters in front of each excitation LED cutting out red tail emission; for measurements using samples with mirror-surface properties.
Note: IMAG-MAX/F is not suitable for use with IMAG-MAX/LR
IMAG-MAX/LR
replaces the standard IMAG-MAX/L LED array when red excitation light (650 nm) is required. The package includes its own power supply and IMAG-MAX/FR pre-filters.
Note: Not compatible with IMAG-MAX/F optical filter
IMAG-K6
Camera with 2/3" CCD chip (1392 x 1040 pixel primary resolution), integrated data digitization and data transmission via GigE-Vision interface, increased sensitivity due to NIR enhanced CCD and 4-pixel binning for 640 x 480 pixel image display. Recommended objective K6-MAX. Not compatible with zoom lens IMAG-MAX/Z.
IMAG-K7
IMAG‑K7 features a 1/2" CCD chip with 640x480 pixel resolution. The data are digitized within the camera and transferred via Ethernet interface (GigE-Vision®) to the PC. Compatible to Multi Control Unit IMAG-CG and lens set K7-MAX/Z (zoom lens) or K7-MAX/S.
ULM-500
Universal Light Meter & Data logger for light calibration of the internal light list of the 3D Version. A compatible PAR sensor like the LS-C is needed
Mini Quantum Sensor LS-C
The Mini Quantum PAR Sensor LS-C is a miniaturized, flat sensor that can be placed close to leaves in small spaces, for example within cuvettes. The LS-C measures photosynthetically active radiation (PAR). The sensor is well suited for light incident perpendicular to the surface between -30° and + 30°.
Spare Battery Set (000160101441)
The lithium-ion battery replacement and mounting kit comes with mounted plug and manual for the exchange.
Please note that lithium-ion batteries can only be shipped abroad under increased safety precautions.
In our Battery table you will find further sources of supply and information.
IMAG-MAX/B
Open leaf holder for fixing sample leaves at a defined working distance of 18.5 cm in a plane perpendicular to the optical axis
IMAG-MAX/HF
Fruit Adapter for MAXI Imaging version
This item can be attached to the IMAG-MAX/L or IMAG-MAX/LR LED panel to measure fruits such as apples, oranges or peppers horizontally (also attached). The set includes distance rods, fruit support and a tripod mount to attach the sensor head to a suitable tripod with a 1/4" screw. Compatible with IMAG-K7 and K7-MAX/Z lens and camera combination. The tripod is not included.
000244615814
Tripod mount for IMAG-MAX/L or IMAG-MAX/LR
The item is attached to the back of the IMAG-MAX/L or IMAG-MAX/LR and enables the upright mounting of an IMAGING-PAM measuring head (MAXI version).
The mount has a 3/8" thread for the tripod head.
K7-MAX/Z
Zoom lens set consisting of Cosmicar-Pentax objective (F1.0/8-48 mm), close-up lens, spacer ring, appropriate detector filter set and an adapter-frame for mounting the CCD-camera IMAG-K7 or IMAG-K5
K6-MAX
Bundle consisting of prime lens (F1.4/12.5 mm, Cosmicar-Pentax), together with spacer ring and appropriate PSII filter set
IMAG-CM/MOD
Conversion of an existing IMAG-CG multi-control unit to the current state of electronics and GigE communication. This ensures full compatibility between the Win10 or 11 (64 bit) operating systems and the current software (adaptation of the electronic components, latest firmware and replacement of the internal battery).
After the update, ImagingWin software versions greater than version number 2.5x can be used. This corrects communication errors and extends the remote-control options.
The device must be sent to Walz, Germany, for the update. Please contact Heinz Walz GmbH beforehand to clarify any additional modifications to the measuring heads that may be necessary.
IMAG-CG/MOD
Conversion of an existing IMAG-CG multi-control unit to the current state of electronics and GigE communication. This ensures full compatibility between the Win10 or 11 (64 bit) operating systems and the current software (adaptation of the electronic components, latest firmware and replacement of the internal battery).
After the update, ImagingWin software versions greater than version number 2.5x can be used. This corrects communication errors and extends the remote-control options.
The device must be sent to Walz, Germany, for the update. Please contact Heinz Walz GmbH beforehand to clarify any additional modifications to the measuring heads that may be necessary.
