IMAG-CM/MOD

Conversion of an existing IMAG-CG multi-control unit to the current state of electronics and GigE communication. This ensures full compatibility between the Win10 or 11 (64 bit) operating systems and the current software (adaptation of the electronic components, latest firmware and replacement of the internal battery).
After the update, ImagingWin software versions greater than version number 2.5x can be used. This corrects communication errors and extends the remote-control options.
The device must be sent to Walz, Germany, for the update. Please contact Heinz Walz GmbH beforehand to clarify any additional modifications to the measuring heads that may be necessary.

Modification to update an existing multi-control unit IMAG-CM to the current electronic status and GigE‑communication. This ensures full compatibility between Win10 operating systems (64 bit) and the latest software (adaptation of electronic components, firmware, and modification of the housing by inactivating the “CAMERA” socket and omitting the USB port; replacement of the internal battery).

Important: after the modification, the central unit is no longer compatible with the old IEEE1394 (FireWire) cameras (part numbers smaller than IMAG-K6). For owners of an IMAG-C multi-control unit (standard head) there is no conversion possibility. In addition, the multi-control unit from MICRO-HEADS can be converted, but this can then only be connected to currently available measuring heads.

For the conversion, the device must be sent to Walz, Germany. Please be sure to contact Heinz Walz GmbH beforehand to clarify any additional modifications to the measuring heads that may be necessary.

Modification to update an existing multi-control unit IMAG-CM to the current electronic status and GigE‑communication. This ensures full compatibility between Win10 operating systems (64 bit) and the latest software (adaptation of electronic components, firmware, and modification of the housing by inactivating the “CAMERA” socket and omitting the USB port; replacement of the internal battery).

Important: after the modification, the central unit is no longer compatible with the old IEEE1394 (FireWire) cameras (part numbers smaller than IMAG-K6). For owners of an IMAG-C multi-control unit (standard head) there is no conversion possibility. In addition, the multi-control unit from MICRO-HEADS can be converted, but this can then only be connected to currently available measuring heads.

For the conversion, the device must be sent to Walz, Germany. Please be sure to contact Heinz Walz GmbH beforehand to clarify any additional modifications to the measuring heads that may be necessary.